U-Boot 1.1.4 (April 17, 2009 Micrel GPHY 200-16)

DRAM:  64 MB
Flash: 1c000000  8 MB
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0
## Booting image at 1c040000 ...
   Image Name:   Kernel-Ramdisk-Image
   Image Type:   ARM Linux Multi-File Image (uncompressed)
   Data Size:    4114267 Bytes =  3.9 MB
   Load Address: 00008000
   Entry Point:  00008000
   Contents:
   Image 0:  1483204 Bytes =  1.4 MB
   Image 1:  2631051 Bytes =  2.5 MB
   Verifying Checksum ... OK
OK
   Relocate RAMDISK from 0x1c1aa210 to 0x700000 by 0x28258b bytes

Starting kernel ...

Uncompressing Linux.................................................................................................. done, booting the kernel.
Linux version 2.6.23.17-Pegasus (gcc version 4.2.1)
CPU: ARM922T [41029220] revision 0 (ARMv4T), cr=c0007177
Machine: Micrel Pegasus
Memory policy: ECC disabled, Data cache writeback
Pegasus ID=8692  SubID=03  Revision=02
Clocks: System 166 MHz, CPU 250 MHz, DDR 200 MHz, PCI 33 MHz, IPsec 200 MHz
CPU0: D VIVT write-back cache
CPU0: I cache: 8192 bytes, associativity 64, 32 byte lines, 4 sets
CPU0: D cache: 8192 bytes, associativity 64, 32 byte lines, 4 sets
Built 1 zonelists in Zone order.  Total pages: 16256
Kernel command line: console=ttyAM0,115200 root=/dev/sda1 rootdelay=10
PID hash table entries: 256 (order: 8, 1024 bytes)
console [ttyAM0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 59176KB available (2796K code, 193K data, 124K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
PCI: bus0: Fast back to back transfers disabled
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
Time: pegasus clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
Freeing initrd memory: 2569K
NetWinder Floating Point Emulator V0.97 (double precision)
NTFS driver 2.1.28 [Flags: R/O].
JFFS2 version 2.2. (NAND) б╘ 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered (default)
Serial: Micrel Pegasus UART driver version: 2.6.1.0
ttyAM0 at MMIO 0x1fffe000 (irq = 45) is a Pegasus
ttyAM1 at MMIO 0x1fffe080 (irq = 49) is a Pegasus
ttyAM2 at MMIO 0x1fffe100 (irq = 52) is a Pegasus
ttyAM3 at MMIO 0x1fffe180 (irq = 55) is a Pegasus
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Micrel Pegasus 1.0.0 (Jul 9, 2009)
physmap platform flash device: 00800000 at 1c000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Using physmap partition information
Creating 5 MTD partitions on "physmap-flash.0":
0x00000000-0x00040000 : "loader"
0x00040000-0x001c0000 : "linux"
0x001c0000-0x00720000 : "rootfs"
0x00720000-0x007c0000 : "rootfs_data"
0x007c0000-0x00800000 : "spare"
pegasus-spi at 0xc0b75fe0 ioaddr 0xf200d900 irq 43
(SPI_CSR)0xF200D91C: 40881101
pegasus-ehci pegasus-ehci: Pegasus-EHCI
pegasus-ehci pegasus-ehci: new USB bus registered, assigned bus number 1
pegasus-ehci pegasus-ehci: irq 8, io mem 0x1fffc000
pegasus-ehci pegasus-ehci: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
pegasus-ohci pegasus-ohci: Pegasus-OHCI
pegasus-ohci pegasus-ohci: new USB bus registered, assigned bus number 2
pegasus-ohci pegasus-ohci: irq 9, io mem 0x1fffd000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v3.0
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
pegasus-i2c at 0xc0b87d40 ioaddr 0xf200d800 irq 40
pegasus-i2c pegasus-i2c: i2c-0: Micrel Pegasus I2C master controller
Micrel Watchdog Timer enabled (5 seconds)
pegasus-sdhci: Micrel Pegasus Secure Digital Host Controller Interface driver
mmc0: Pegasus-SDHCI at 0x1fffa000 irq 7 DMA
nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
NET: Registered protocol family 17
Bridge firewalling registered
Waiting 10sec before mounting root device...
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Centaur Home Gateway, Micrel, Inc., Copyright (C) August 28, 2009.
Micrel Centaur Linux SOHO Gateway
Fri Aug 28 12:00:00 UTC 2009
ADDRCONF(NETDEV_UP): eth1: link is not ready
udhcp server (v0.9.8) started
LAN is up and running
loading HTTP server
loading TFTP server
time: 15566 ms
start wireless modules
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready


BusyBox v1.4.1 (2009-09-01 10:58:45 PDT) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

/ # ADDRCONF(NETDEV_UP): eth0: link is not ready