Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1-00163 S - IMAGE_VARIANT_STRING=HAACANAZA S - OEM_IMAGE_VERSION_STRING=CRM S - Boot Config, 0x000002e5 B - 201 - PBL, Start B - 2736 - bootable_media_detect_entry, Start B - 3449 - bootable_media_detect_success, Start B - 3454 - elf_loader_entry, Start B - 7635 - auth_hash_seg_entry, Start B - 7881 - auth_hash_seg_exit, Start B - 69818 - elf_segs_hash_verify_entry, Start B - 132674 - PBL, End B - 145973 - SBL1, Start B - 198646 - GCC [RstStat:0x10, RstDbg:0x600000] WDog Stat : 0x4 B - 205204 - pm_device_init, Start B - 328881 - PM_SET_VAL:Skip D - 123220 - pm_device_init, Delta B - 331321 - pm_driver_init, Start D - 5398 - pm_driver_init, Delta B - 337604 - clock_init, Start D - 2104 - clock_init, Delta B - 341630 - boot_flash_init, Start D - 16744 - boot_flash_init, Delta B - 362157 - boot_config_data_table_init, Start D - 3995 - boot_config_data_table_init, Delta - (575 Bytes) B - 369538 - Boot Setting : 0x00000618 B - 373625 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:8 B - 380457 - sbl1_ddr_set_params, Start B - 384269 - CPR configuration: 0x30c B - 387716 - cpr_init, Start B - 390491 - Rail:0 Mode: 5 Voltage: 824000 B - 395707 - CL CPR settled at 776000mV B - 398543 - Rail:1 Mode: 5 Voltage: 888000 B - 402722 - Rail:1 Mode: 7 Voltage: 928000 D - 16531 - cpr_init, Delta B - 409615 - Pre_DDR_clock_init, Start B - 413610 - Pre_DDR_clock_init, End B - 416996 - DDR Type : PCDDR3 B - 422638 - do ddr sanity test, Start D - 1067 - do ddr sanity test, Delta B - 427488 - DDR: Start of HAL DDR Boot Training B - 432124 - DDR: End of HAL DDR Boot Training B - 437919 - DDR: Checksum to be stored on flash is -1144128950 B - 448319 - Image Load, Start D - 216245 - QSEE Image Loaded, Delta - (1374928 Bytes) B - 664656 - Image Load, Start D - 61 - SEC Image Loaded, Delta - (0 Bytes) B - 672342 - Image Load, Start D - 12017 - DEVCFG Image Loaded, Delta - (26148 Bytes) B - 684450 - Image Load, Start D - 23058 - RPM Image Loaded, Delta - (86660 Bytes) B - 707569 - Image Load, Start D - 89914 - APPSBL Image Loaded, Delta - (572642 Bytes) B - 797605 - QSEE Execution, Start D - 61 - QSEE Execution, Delta B - 803431 - USB D+ check, Start D - 0 - USB D+ check, Delta B - 809805 - SBL1, End D - 666150 - SBL1, Delta S - Flash Throughput, 6903 KB/s (2061625 Bytes, 298617 us) S - DDR Frequency, 466 MHz S - Core 0 Frequency, 1651 MHz U-Boot 2016.01 (Jul 25 2022 - 17:08:05 +0800) DRAM: smem ram ptable found: ver: 1 len: 4 1 GiB NAND: Could not find nand_gpio in dts, using defaults Not an ONFI device ONFI probe failed ID = 2691a398 Vendor = 98 Device = a3 qpic_nand: changing oobsize to 160 from 256 bytes SF: Unsupported flash IDs: manuf ff, jedec ffff, ext_jedec ffff ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0) 1024 MiB MMC: sdhci: Node Not found, skipping initialization PCI0 is not defined in the device tree PCI1 is not defined in the device tree In: serial@78B3000 Out: serial@78B3000 Err: serial@78B3000 machid: 8010008 MMC Device 0 not found [arc_board_setting] [serial_register_init] Hit any key to stop autoboot: 2 1 0 [do_boot_unsignedimg(903)] debug:0 [do_boot_unsignedimg(934)] runcmd:setenv mtdids nand0=nand0 && setenv mtdparts mtdparts=nand0:0x6400000@0x8c80000(fs),${msmparts} && ubi part fs && ubi read 0x44000000 kernel && ubi0: attaching mtd1 ubi0: scanning is finished ubi0: attached mtd1 (name "mtd=0", size 100 MiB) ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 ubi0: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 185/140, WL threshold: 4096, image sequence number: 214663511 ubi0: available PEBs: 0, total reserved PEBs: 400, PEBs reserved for bad PEB handling: 80 Read 0 bytes from volume kernel to 44000000 No size specified -> Using max size (5332992) [do_boot_unsignedimg(1004)] mtdids:nand0=nand0 ## Loading kernel from FIT Image at 44000000 ... Using 'config@hk09' configuration Trying 'kernel-1' kernel subimage Description: ARM64 OpenWrt Linux-6.6.37 Type: Kernel Image Compression: gzip compressed Data Start: 0x440000e8 Data Size: 5200073 Bytes = 5 MiB Architecture: AArch64 OS: Linux Load Address: 0x41000000 Entry Point: 0x41000000 Hash algo: crc32 Hash value: a136e42e Hash algo: sha1 Hash value: 5b91d04073c86fe6482a16e4be3e7de770b85078 Verifying Hash Integrity ... crc32+ sha1+ OK ## Loading fdt from FIT Image at 44000000 ... Using 'config@hk09' configuration Trying 'fdt-1' fdt subimage Description: ARM64 OpenWrt arcadyan_aw1000 device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x444f5af4 Data Size: 51749 Bytes = 50.5 KiB Architecture: AArch64 Hash algo: crc32 Hash value: 14f6934e Hash algo: sha1 Hash value: 98746186f5f883d98fa70bbdf05856ffd75aa341 Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x444f5af4 Uncompressing Kernel Image ... OK Loading Device Tree to 4a3f0000, end 4a3ffa24 ... OK Could not find PCI in device tree Using machid 0x8010008 from environment Starting kernel ... Jumping to AARCH64 kernel via monitor [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.6.37 (rob@omv) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r26913-4faa2d1646) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP PREEMPT Wed Jul 10 02:43:07 2024 [ 0.000000] Machine model: Arcadyan AW1000 [ 0.000000] OF: reserved mem: 0x0000000040000000..0x0000000040ffffff (16384 KiB) nomap non-reusable nss@40000000 [ 0.000000] OF: reserved mem: 0x000000004a400000..0x000000004a5fffff (2048 KiB) nomap non-reusable tzapp@4a400000 [ 0.000000] OF: reserved mem: 0x000000004a600000..0x000000004a9fffff (4096 KiB) nomap non-reusable bootloader@4a600000 [ 0.000000] OF: reserved mem: 0x000000004aa00000..0x000000004aafffff (1024 KiB) nomap non-reusable sbl@4aa00000 [ 0.000000] OF: reserved mem: 0x000000004ab00000..0x000000004abfffff (1024 KiB) nomap non-reusable smem@4ab00000 [ 0.000000] OF: reserved mem: 0x000000004ac00000..0x000000004affffff (4096 KiB) nomap non-reusable memory@4ac00000 [ 0.000000] OF: reserved mem: 0x000000004b000000..0x0000000050efffff (97280 KiB) nomap non-reusable wcnss@4b000000 [ 0.000000] OF: reserved mem: 0x0000000050f00000..0x0000000050ffffff (1024 KiB) nomap non-reusable q6_etr_dump@50f00000 [ 0.000000] OF: reserved mem: 0x0000000051000000..0x00000000510fffff (1024 KiB) nomap non-reusable m3_dump@51000000 [ 0.000000] OF: reserved mem: 0x0000000051200000..0x00000000512fffff (1024 KiB) nomap non-reusable ramoops@51200000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000040ffffff] [ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a3fffff] [ 0.000000] node 0: [mem 0x000000004a400000-0x00000000510fffff] [ 0.000000] node 0: [mem 0x0000000051100000-0x00000000511fffff] [ 0.000000] node 0: [mem 0x0000000051200000-0x00000000512fffff] [ 0.000000] node 0: [mem 0x0000000051300000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 18 pages/cpu s36136 r8192 d29400 u73728 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 pcie_dev=RG50 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait root=/dev/ubiblock0_1 coherent_pool=2M swiotlb=noforce [ 0.000000] Unknown kernel command line parameters "pcie_dev=RG50", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB [ 0.000000] Memory: 885756K/1048576K available (8128K kernel code, 896K rwdata, 2492K rodata, 1472K init, 276K bss, 162820K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000120] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000133] pid_max: default: 32768 minimum: 301 [ 0.005339] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.005353] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.009797] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.009898] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.010154] rcu: Hierarchical SRCU implementation. [ 0.010159] rcu: Max phase no-delay instances is 1000. [ 0.011129] smp: Bringing up secondary CPUs ... [ 0.011798] Detected VIPT I-cache on CPU1 [ 0.011904] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.012645] Detected VIPT I-cache on CPU2 [ 0.012719] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.013410] Detected VIPT I-cache on CPU3 [ 0.013479] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.013552] smp: Brought up 1 node, 4 CPUs [ 0.013560] SMP: Total of 4 processors activated. [ 0.013565] CPU features: detected: 32-bit EL0 Support [ 0.013570] CPU features: detected: CRC32 instructions [ 0.013639] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.013647] CPU: All CPU(s) started at EL1 [ 0.013650] alternatives: applying system-wide alternatives [ 0.026018] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.026044] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.027821] pinctrl core: initialized pinctrl subsystem [ 0.029930] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.030906] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.031226] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.031537] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.031932] thermal_sys: Registered thermal governor 'step_wise' [ 0.032004] cpuidle: using governor menu [ 0.032241] ASID allocator initialised with 65536 entries [ 0.064492] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 0.068478] Modules: 29408 pages in range for non-PLT usage [ 0.068486] Modules: 520928 pages in range for PLT usage [ 0.073459] SCSI subsystem initialized [ 0.073668] usbcore: registered new interface driver usbfs [ 0.073707] usbcore: registered new interface driver hub [ 0.073772] usbcore: registered new device driver usb [ 0.074209] qcom_scm: convention: smc arm 64 [ 0.076100] clocksource: Switched to clocksource arch_sys_counter [ 0.079871] NET: Registered PF_INET protocol family [ 0.080035] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.082719] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.082783] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.082800] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.082889] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.083164] TCP: Hash tables configured (established 8192 bind 8192) [ 0.083274] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.083313] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.083752] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.083810] PCI: CLS 0 bytes, default 64 [ 0.085595] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 0.086169] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.086176] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.092885] qcom-qmp-usb-phy 58000.phy: supply vdda-phy not found, using dummy regulator [ 0.093065] qcom-qmp-usb-phy 58000.phy: supply vdda-pll not found, using dummy regulator [ 0.094022] qcom-qmp-usb-phy 78000.phy: supply vdda-phy not found, using dummy regulator [ 0.094171] qcom-qmp-usb-phy 78000.phy: supply vdda-pll not found, using dummy regulator [ 0.095402] qcom-qusb2-phy 59000.phy: supply vdd not found, using dummy regulator [ 0.095552] qcom-qusb2-phy 59000.phy: supply vdda-pll not found, using dummy regulator [ 0.095627] qcom-qusb2-phy 59000.phy: supply vdda-phy-dpdm not found, using dummy regulator [ 0.095815] qcom-qusb2-phy 59000.phy: Registered Qcom-QUSB2 phy [ 0.096023] qcom-qusb2-phy 79000.phy: supply vdd not found, using dummy regulator [ 0.096216] qcom-qusb2-phy 79000.phy: supply vdda-pll not found, using dummy regulator [ 0.096265] qcom-qusb2-phy 79000.phy: supply vdda-phy-dpdm not found, using dummy regulator [ 0.096436] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy [ 0.099011] gpio-export gpio-export: 4 gpio(s) exported [ 0.107810] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.109488] msm_serial 78b3000.serial: msm_serial: detected port #0 [ 0.109528] msm_serial 78b3000.serial: uartclk = 3686400 [ 0.109858] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 21, base_baud = 230400) is a MSM [ 0.109893] msm_serial: console setup on port #0 [ 0.109935] printk: console [ttyMSM0] enabled [ 0.963023] msm_serial: driver initialized [ 0.972390] loop: module loaded [ 0.973630] nand: device found, Manufacturer ID: 0x98, Chip ID: 0xa3 [ 0.974349] nand: Toshiba TH58NYG3S0HBAI4 8G 1.8V 8-bit [ 0.980962] nand: 1024 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 256 [ 0.987263] spmi spmi-0: PMIC arbiter version v2 (0x20010000) [ 1.047836] i2c_dev: i2c /dev entries driver [ 1.054799] sdhci: Secure Digital Host Controller Interface driver [ 1.054845] sdhci: Copyright(c) Pierre Ossman [ 1.059910] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.065698] remoteproc remoteproc0: releasing cd00000.q6v5_wcss [ 1.073756] NET: Registered PF_INET6 protocol family [ 1.076904] Segment Routing with IPv6 [ 1.080927] In-situ OAM (IOAM) with IPv6 [ 1.084527] NET: Registered PF_PACKET protocol family [ 1.088648] Bridge firewalling registered [ 1.093498] 8021q: 802.1Q VLAN Support v1.8 [ 1.131695] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 1.132033] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 [ 1.138985] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1 [ 1.144420] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 [ 1.152097] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable [ 1.159606] cpr3_mem_acc_init: apc: not using memory accelerator regulator [ 1.168735] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 704000 uV [ 1.175672] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 816000 uV [ 1.185664] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 896000 uV [ 1.195472] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 992000 uV [ 1.205333] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 685, quot_offset[ 7]= 0 [ 1.215093] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 885, quot_offset[ 7]= 200 [ 1.225944] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1013, quot_offset[ 7]= 125 [ 1.236880] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1171, quot_offset[ 7]= 155 [ 1.248068] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop [ 1.250614] nand: device found, Manufacturer ID: 0x98, Chip ID: 0xa3 [ 1.265511] nand: Toshiba TH58NYG3S0HBAI4 8G 1.8V 8-bit [ 1.271963] nand: 1024 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 256 [ 1.277281] 26 qcomsmem partitions found on MTD device qcom_nand.0 [ 1.284870] Creating 26 MTD partitions on "qcom_nand.0": [ 1.290876] 0x000000000000-0x000000100000 : "0:sbl1" [ 1.297564] 0x000000100000-0x000000200000 : "0:mibib" [ 1.302237] 0x000000200000-0x000000280000 : "0:bootconfig" [ 1.306996] 0x000000280000-0x000000300000 : "0:bootconfig1" [ 1.312391] 0x000000600000-0x000000900000 : "0:qsee" [ 1.318954] 0x000000300000-0x000000600000 : "0:qsee_1" [ 1.324093] 0x000000980000-0x000000a00000 : "0:devcfg" [ 1.328000] 0x000000900000-0x000000980000 : "0:devcfg_1" [ 1.333090] 0x000000a00000-0x000000a80000 : "0:apdp" [ 1.338602] 0x000000a80000-0x000000b00000 : "0:apdp_1" [ 1.343523] 0x000000b80000-0x000000c00000 : "0:rpm" [ 1.348541] 0x000000b00000-0x000000b80000 : "0:rpm_1" [ 1.353267] 0x000000c80000-0x000000d00000 : "0:cdt" [ 1.358514] 0x000000c00000-0x000000c80000 : "0:cdt_1" [ 1.363201] 0x000000d00000-0x000000d80000 : "0:appsblenv" [ 1.368396] 0x000000e80000-0x000000f80000 : "0:appsbl" [ 1.373937] 0x000000d80000-0x000000e80000 : "0:appsbl_1" [ 1.379056] 0x000000f80000-0x000001000000 : "0:art" [ 1.384215] 0x000008c80000-0x00000f080000 : "rootfs" [ 1.431465] mtd: setting mtd18 (rootfs) as root device [ 1.431992] mtdsplit: no squashfs found in "rootfs" [ 1.435546] 0x00000f080000-0x000010900000 : "0:wififw" [ 1.451322] 0x000001000000-0x000007400000 : "rootfs_1" [ 1.494567] 0x000007400000-0x000008c80000 : "0:wififw_1" [ 1.505706] 0x000010900000-0x000010b40000 : "0:ethphyfw" [ 1.507302] 0x000010b40000-0x000010c40000 : "0:board_data" [ 1.511094] 0x000010c40000-0x000011440000 : "0:arc_datadump" [ 1.519386] 0x000011440000-0x00003e000000 : "0:arc_data" [ 1.838613] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 800000 KHz, changing to: 1017600 KHz [ 1.840542] remoteproc remoteproc0: cd00000.q6v5_wcss is available [ 1.848676] ubi0: attaching mtd18 [ 2.239481] ubi0: scanning is finished [ 2.245218] ubi0: attached mtd18 (name "rootfs", size 100 MiB) [ 2.245252] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 2.249963] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 2.256818] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 2.263660] ubi0: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0 [ 2.270434] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 [ 2.276685] ubi0: max/mean erase counter: 185/140, WL threshold: 4096, image sequence number: 214663511 [ 2.283717] ubi0: available PEBs: 0, total reserved PEBs: 400, PEBs reserved for bad PEB handling: 80 [ 2.293014] ubi0: background thread "ubi_bgt0d" started, PID 649 [ 2.302822] block ubiblock0_1: created from ubi0:1(ro�[ 2.317687] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 2.318160] Freeing unused kernel memory: 1472K [ 2.323873] Run /sbin/init as init process [ 2.470898] init: Console is alive [ 2.471009] init: - watchdog - [ 2.496138] random: crng init done [ 3.187303] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 3.219773] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 3.253214] ssdk_dt_parse_interrupt[941]:INFO:intr-gpio does not exist [ 4.366177] regi_init[2525]:INFO:Initializing HPPE Done!! [ 4.366278] regi_init[2574]:INFO:qca-ssdk module init succeeded! [ 4.372221] EDMA ver 1 hw init [ 4.376895] EDMA HW Reset completed succesfully [ 4.379529] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7) [ 4.383924] RxDesc:1 (15-15) RxFill:1 (7-7) [ 4.389476] dp1: ppe offload disabled: 0 for macid 1 [ 4.393300] dp1: Switch attached to macid 1 status: 0 [ 4.596720] Qualcomm QCA8075 90000.mdio-1:00: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:00, irq=POLL) [ 4.597406] dp2: ppe offload disabled: 0 for macid 2 [ 4.605602] dp2: Switch attached to macid 2 status: 0 [ 4.686374] Qualcomm QCA8075 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL) [ 4.687037] dp3: ppe offload disabled: 0 for macid 3 [ 4.695256] dp3: Switch attached to macid 3 status: 0 [ 4.776373] Qualcomm QCA8075 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL) [ 4.777045] dp4: ppe offload disabled: 0 for macid 4 [ 4.785254] dp4: Switch attached to macid 4 status: 0 [ 4.866381] Qualcomm QCA8075 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL) [ 4.867050] dp6-syn: ppe offload disabled: 0 for macid 6 [ 4.875266] dp6-syn: Switch attached to macid 6 status: 0 [ 4.977747] Qualcomm QCA8081 90000.mdio-1:1c: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:1c, irq=POLL) [ 4.978407] ********************************************************** [ 4.986652] * NSS Data Plane driver [ 4.993138] ********************************************************** [ 5.022546] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 5.022594] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 5.027109] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008002000010 [ 5.034525] xhci-hcd xhci-hcd.1.auto: irq 41, io mem 0x08a00000 [ 5.044020] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 5.049884] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 5.055323] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 5.063242] hub 1-0:1.0: USB hub found [ 5.069481] hub 1-0:1.0: 1 port detected [ 5.073383] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.077500] hub 2-0:1.0: USB hub found [ 5.085356] hub 2-0:1.0: 1 port detected [ 5.089240] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 5.092996] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 [ 5.098434] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008002000010 [ 5.105877] xhci-hcd xhci-hcd.2.auto: irq 42, io mem 0x08c00000 [ 5.115316] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 5.121121] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 [ 5.126683] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 5.134501] hub 3-0:1.0: USB hub found [ 5.140837] hub 3-0:1.0: 1 port detected [ 5.144735] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.148867] hub 4-0:1.0: USB hub found [ 5.156720] hub 4-0:1.0: 1 port detected [ 5.163223] usbcore: registered new interface driver usb-storage [ 5.165191] usbcore: registered new interface driver uas [ 5.170594] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 5.180925] init: - preinit - Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 7.604201] mount_root: loading kmods from internal overlay [ 7.616668] kmodloader: loading kernel modules from //etc/modules-boot.d/* [ 7.619516] kmodloader: done loading kernel modules from //etc/modules-boot.d/* [ 7.721609] block: attempting to load /tmp/overlay/upper/etc/config/fstab [ 7.721699] block: unable to load configuration (fstab: Entry not found) [ 7.727489] block: attempting to load /tmp/overlay/etc/config/fstab [ 7.734188] block: unable to load configuration (fstab: Entry not found) [ 7.740218] block: attempting to load /etc/config/fstab [ 7.748361] block: unable to load configuration (fstab: Entry not found) [ 7.752062] block: no usable configuration [ 7.761133] UBIFS (ubi0:2): Mounting in unauthenticated mode [ 7.762974] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 949 [ 7.819684] UBIFS (ubi0:2): recovery needed [ 7.949797] UBIFS (ubi0:2): recovery completed [ 7.949909] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" [ 7.953156] UBIFS (ubi0:2): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 7.961074] UBIFS (ubi0:2): FS size: 52314112 bytes (49 MiB, 206 LEBs), max 216 LEBs, journal size 2539520 bytes (2 MiB, 10 LEBs) [ 7.970963] UBIFS (ubi0:2): reserved for root: 2470924 bytes (2413 KiB) [ 7.982588] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID EE15256E-6AB6-4A84-8A1C-FC71550BE41B, small LPT model [ 7.990929] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab [ 8.007498] block: extroot: not configured [ 8.007628] UBIFS (ubi0:2): un-mount UBI device 0 [ 8.011399] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" stops [ 8.019349] UBIFS (ubi0:2): Mounting in unauthenticated mode [ 8.022309] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 952 [ 8.148289] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" [ 8.148328] UBIFS (ubi0:2): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 8.155107] UBIFS (ubi0:2): FS size: 52314112 bytes (49 MiB, 206 LEBs), max 216 LEBs, journal size 2539520 bytes (2 MiB, 10 LEBs) [ 8.165023] UBIFS (ubi0:2): reserved for root: 2470924 bytes (2413 KiB) [ 8.176633] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID EE15256E-6AB6-4A84-8A1C-FC71550BE41B, small LPT model [ 8.189232] mount_root: loading kmods from internal overlay [ 8.204655] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/* [ 8.206654] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/* [ 8.250671] block: attempting to load /tmp/overlay/upper/etc/config/fstab [ 8.255185] block: extroot: not configured [ 8.257726] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab [ 8.260558] block: extroot: not configured [ 8.269624] mount_root: switching to ubifs overlay [ 8.277585] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. [ 8.281782] urandom-seed: Seeding with /etc/urandom.seed [ 8.323367] procd: - early - [ 8.323464] procd: - watchdog - Failed to connect to ubus [ 8.850427] procd: - watchdog - [ 8.850632] procd: - ubus - [ 9.006148] procd: - init - Please press Enter to activate this console. [ 9.402953] kmodloader: loading kernel modules from /etc/modules.d/* [ 9.483487] urngd: v1.0.2 started. [ 9.499361] jitterentropy: Initialization failed with host not compliant with requirements: 9 [ 9.607636] l2tp_core: L2TP core driver, V2.0 [ 9.608406] l2tp_netlink: L2TP netlink interface [ 9.709199] qca-nss 39000000.nss: NSS fw version: NSS.FW.12.1-022-HK.R [ 9.709240] qca-nss 39000000.nss: fw of size 827584 bytes copied to addr: 40000000, nss_id: 0 [ 9.741964] qca-nss 39400000.nss: fw of size 295196 bytes copied to addr: 40800000, nss_id: 1 [ 9.747137] gre: GRE over IPv4 demultiplexor driver [ 9.747998] qca-nss 39000000.nss: NSS core 0 booted successfully [ 9.754360] ip_gre: GRE over IPv4 tunneling driver [ 9.754517] qca-nss 39400000.nss: NSS core 1 booted successfully [ 9.771500] usbcore: registered new interface driver cdc_wdm [ 9.772355] rmnet_nss_init(): initializing rmnet_nss [ 9.780278] usbcore: registered new interface driver qmi_wwan_q [ 9.783205] nss_vlan_mgr_init_module[1940]:Module (Build Build Id: 07/11/24, 11:21:32) loaded [ 9.790290] nss_wifi_meshmgr_init_module[1997]:Module Build Id: 07/11/24, 11:21:33 loaded [ 9.797420] GACT probability on [ 9.805026] Mirror/redirect action on [ 9.811706] u32 classifier [ 9.811737] input device check on [ 9.813620] Actions configured [ 9.830615] usbcore: registered new interface driver cdc_acm [ 9.830652] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 9.836042] usbcore: registered new interface driver cdc_eem [ 9.843917] usbcore: registered new interface driver cdc_ether [ 9.850070] usbcore: registered new interface driver cdc_ncm [ 9.855211] Loading modules backported from Linux version v6.6.15-0-g51f354b815c4 [ 9.860459] Backport generated by backports.git 193becf2 [ 9.869313] usbcore: registered new interface driver huawei_cdc_ncm [ 9.884885] usbcore: registered new interface driver qmi_wwan [ 9.886015] NET: Registered PF_QIPCRTR protocol family [ 9.891953] usbcore: registered new interface driver rndis_host [ 9.900134] usbcore: registered new interface driver ums-alauda [ 9.901313] usbcore: registered new interface driver ums-cypress [ 9.907723] usbcore: registered new interface driver ums-datafab [ 9.913603] usbcore: registered new interface driver ums-freecom [ 9.919713] usbcore: registered new interface driver ums-isd200 [ 9.925477] usbcore: registered new interface driver ums-jumpshot [ 9.931197] usbcore: registered new interface driver ums-karma [ 9.937535] usbcore: registered new interface driver ums-sddr09 [ 9.943121] usbcore: registered new interface driver ums-sddr55 [ 9.949052] usbcore: registered new interface driver ums-usbat [ 9.955429] usbcore: registered new interface driver usbserial_generic [ 9.959977] usbserial: USB Serial support registered for generic [ 9.977040] xt_time: kernel timezone is -0000 [ 9.977908] usbcore: registered new interface driver cdc_mbim [ 10.035172] PPP generic driver version 2.4.2 [ 10.036275] NET: Registered PF_PPPOX protocol family [ 10.039661] PPTP driver version 0.8.5 [ 10.044580] usbcore: registered new interface driver sierra [ 10.047185] usbserial: USB Serial support registered for Sierra USB modem [ 10.055492] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 10.059373] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 10.079732] ath11k c000000.wifi: ipq8074 hw2.0 [ 10.079767] ath11k c000000.wifi: FW memory mode: 0 [ 10.083317] remoteproc remoteproc0: powering up cd00000.q6v5_wcss [ 10.088257] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668 [ 11.094262] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up [ 11.145742] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0x270 soc_id 0xffffffff [ 11.145795] ath11k c000000.wifi: fw_version 0x290604a5 fw_build_timestamp 2023-10-12 02:06 fw_build_id WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1 [ 13.396233] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd [ 13.614749] qmi_wwan_q 4-1:1.4: cdc-wdm0: USB WDM device [ 13.614961] qmi_wwan_q 4-1:1.4: Quectel RG500Q-EA work on RawIP mode [ 13.620908] qmi_wwan_q 4-1:1.4: rx_urb_size = 31744 [ 13.626075] qmi_wwan_q 4-1:1.4 wwan0: register 'qmi_wwan_q' at usb-xhci-hcd.2.auto-1, RMNET/USB device, 9e:bc:5d:95:5f:46 [ 13.631555] net wwan0 wwan0_1: NSS context created [ 13.641290] net wwan0: qmap_register_device wwan0_1 [ 16.301326] remoteproc remoteproc0: stopped remote processor cd00000.q6v5_wcss [ 16.301369] remoteproc remoteproc0: powering up cd00000.q6v5_wcss [ 16.307533] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668 [ 16.657283] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up [ 16.659308] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 16.665768] usbcore: registered new interface driver option [ 16.668436] usbserial: USB Serial support registered for GSM modem (1-port) [ 16.673973] option 4-1:1.0: GSM modem (1-port) converter detected [ 16.680940] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 16.687253] option 4-1:1.1: GSM modem (1-port) converter detected [ 16.694058] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 16.700093] option 4-1:1.2: GSM modem (1-port) converter detected [ 16.706886] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 16.708688] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0x270 soc_id 0xffffffff [ 16.712904] option 4-1:1.3: GSM modem (1-port) converter detected [ 16.719509] ath11k c000000.wifi: fw_version 0x290604a5 fw_build_timestamp 2023-10-12 02:06 fw_build_id WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1 [ 16.728227] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB3 [ 16.750260] usbcore: registered new interface driver qcserial [ 16.753963] usbserial: USB Serial support registered for Qualcomm USB modem [ 16.778934] kmodloader: done loading kernel modules from /etc/modules.d/* [ 17.032697] ath11k c000000.wifi: htt event 48 not handled [ 17.052899] ath11k c000000.wifi: nss init soc nss if_num 203 userpd_id 0 [ 19.053221] ECM init [ 19.053296] ECM database jhash random seed: 0x16acee92 [ 19.055469] ECM init complete [ 19.354270] br-lan: port 1(lan1) entered blocking state [ 19.354316] br-lan: port 1(lan1) entered disabled state [ 19.358691] nss-dp 3a001000.dp1 lan1: entered allmulticast mode [ 19.364066] nss-dp 3a001000.dp1 lan1: entered promiscuous mode [ 19.394020] br-lan: port 2(lan2) entered blocking state [ 19.394115] br-lan: port 2(lan2) entered disabled state [ 19.398335] nss-dp 3a001200.dp2 lan2: entered allmulticast mode [ 19.403830] nss-dp 3a001200.dp2 lan2: entered promiscuous mode [ 19.417229] br-lan: port 3(lan3) entered blocking state [ 19.417301] br-lan: port 3(lan3) entered disabled state [ 19.421411] nss-dp 3a001400.dp3 lan3: entered allmulticast mode [ 19.427690] nss-dp 3a001400.dp3 lan3: entered promiscuous mode [ 19.440866] br-lan: port 4(lan4) entered blocking state [ 19.440923] br-lan: port 4(lan4) entered disabled state [ 19.445073] nss-dp 3a001600.dp4 lan4: entered allmulticast mode [ 19.451119] nss-dp 3a001600.dp4 lan4: entered promiscuous mode [ 21.708718] qca-nss 39000000.nss: Configuring additional NSS pbufs [ 21.738862] qca-nss 39000000.nss: Additional pbufs of size 10002432 got added to NSS [ 29.838694] net wwan0: ul_data_aggregation_max_datagrams=11, ul_data_aggregation_max_size=4096, dl_minimum_padding=0 [ 32.486138] l11: disabling [ 39.982613] net wwan0: link_state 0x0 -> 0x1 [ 40.234210] NSS core 1 signal COREDUMP COMPLETE 4000 [ 40.234250] ffffffc0790f47c0: Starting NSS-FW logbuffer dump for core 1 [ 40.238257] ffffffc0790f47c0: Warn: trap[638]: A4_7: 00000000 3F000228 3F01F48C 3F0057B8 [ 40.244585] ffffffc0790f47c0: Warn: trap[643]: D0_3: 00000010 00000000 00000000 00000000 [ 40.252926] ffffffc0790f47c0: Warn: trap[643]: D4_7: 00000000 00000000 00000000 00000000 [ 40.260996] ffffffc0790f47c0: Warn: trap[643]: D8_11: 00000000 00000000 00000000 00000000 [ 40.269068] ffffffc0790f47c0: Warn: trap[643]: D12_15: 00000000 00000000 00000000 00000000 [ 40.277141] ffffffc0790f47c0: Warn: trap[647]: PC 3F00059C: D6A00001 2CC004C0 00000800 24C004C0 [ 40.285297] ffffffc0790f47c0: Warn: trap[650]: PPC 3F000598: 012D9000 D6A00001 2CC004C0 00000800 [ 40.293896] ffffffc0790f47c0: Warn: trap[633]: Thread 10: [ 40.302917] ffffffc0790f47c0: Warn: trap[638]: A0_3: 3C000400 00000002 3F01F45C 3C000100 [ 40.308224] ffffffc0790f47c0: Warn: trap[638]: A4_7: 3F02F92C 3F02FAAC 3F01F35C 3F004FB8 [ 40.316378] ffffffc0790f47c0: Warn: trap[643]: D0_3: 00000010 00000002 645001F0 00000004 [ 40.324446] ffffffc0790f47c0: Warn: trap[643]: D4_7: 00000051 00000001 173F7A00 FFFFFF80 [ 40.332523] ffffffc0790f47c0: Warn: trap[643]: D8_11: 00000000 00000000 00000000 00000000 [ 40.340597] ffffffc0790f47c0: Warn: trap[643]: D12_15: 00000000 00000000 00000000 00000000 [ 40.348668] ffffffc0790f47c0: Warn: trap[647]: PC 3F00059C: D6A00001 2CC004C0 00000800 24C004C0 [ 40.356829] ffffffc0790f47c0: Warn: trap[650]: PPC 3F000598: 012D9000 D6A00001 2CC004C0 00000800 [ 40.365420] ffffffc0790f47c0: Warn: trap[633]: Thread 11: [ 40.374444] ffffffc0790f47c0: Warn: trap[638]: A0_3: 408815E4 00000001 3F01F32C 40881580 [ 40.379745] ffffffc0790f47c0: Warn: trap[638]: A4_7: 408815E4 40827BE0 3F01F22C 3F0047B8 [ 40.387906] ffffffc0790f47c0: Warn: trap[643]: D0_3: 0000768C 00000001 0000768B 00000000 [ 40.395974] ffffffc0790f47c0: Warn: trap[643]: D4_7: 3F02F82C 00000000 00000001 FFFFFFFD [ 40.404054] ffffffc0790f47c0: Warn: trap[643]: D8_11: 00000014 00000019 00000000 00000000 [ 40.412123] ffffffc0790f47c0: Warn: trap[643]: D12_15: 00000000 00000000 00000000 00000000 [ 40.420197] ffffffc0790f47c0: Warn: trap[647]: PC 3F00059C: D6A00001 2CC004C0 00000800 24C004C0 [ 40.428357] ffffffc0790f47c0: Warn: trap[650]: PPC 3F000598: 012D9000 D6A00001 2CC004C0 00000800 [ 40.440008] NSS core 0 signal COREDUMP COMPLETE 4000 [ 40.445969] ffffffc0790ece80: Starting NSS-FW logbuffer dump for core 0 [ 40.450929] Kernel panic - not syncing: NSS FW coredump: bringing system down [ 40.457259] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.6.37 #0 [ 40.464548] Hardware name: Arcadyan AW1000 (DT) [ 40.472008] Call trace: [ 40.476258] dump_backtrace+0xa0/0xe0 [ 40.478690] show_stack+0x18/0x24 [ 40.482509] dump_stack_lvl+0x48/0x60 [ 40.485808] dump_stack+0x18/0x24 [ 40.489453] panic+0x2dc/0x330 [ 40.492751] nss_fw_coredump_notify+0x1d8/0x3bc [qca_nss_drv] [ 40.495708] nss_core_handle_napi_emergency+0x38/0x4c [qca_nss_drv] [ 40.501525] __napi_poll+0x38/0x178 [ 40.507595] net_rx_action+0x114/0x24c [ 40.511069] handle_softirqs+0x104/0x244 [ 40.514889] __do_softirq+0x14/0x20 [ 40.518967] ____do_softirq+0x10/0x1c [ 40.522180] call_on_irq_stack+0x24/0x4c [ 40.526000] do_softirq_own_stack+0x1c/0x28 [ 40.529992] irq_exit_rcu+0xc8/0xe4 [ 40.533898] el1_interrupt+0x38/0x68 [ 40.537370] el1h_64_irq_handler+0x18/0x24 [ 40.541191] el1h_64_irq+0x68/0x6c [ 40.545095] default_idle_call+0x28/0x3c [ 40.548483] do_idle+0x1cc/0x1ec [ 40.552561] cpu_startup_entry+0x34/0x3c [ 40.555774] kernel_init+0x0/0x1e0 [ 40.559679] arch_post_acpi_subsys_init+0x0/0x8 [ 40.562893] start_kernel+0x514/0x648 [ 40.567319] __primary_switched+0xb4/0xbc [ 40.571139] SMP: stopping secondary CPUs [ 40.575136] Kernel Offset: disabled [ 40.579123] CPU features: 0x0,00000000,00000000,0000400b [ 40.582340] Memory Limit: none [ 40.787894] Rebooting in 3 seconds..